Home

7100GRY Made in USA New in Box

First ever gray DLC blade that Kershaw has done, very Nice !!!!

**This is a Exclusive run**

The CPM154 powdered metallurgy blade steel has more uniform distribution of carbides – so it takes and holds an excellent edge. It also provides good corrosion resistance, wear resistance, and toughness. The blade has a stonewashed finish. To lighten the Launch 1’s weight, the handles are durable anodized aluminum and are contoured to fit snugly in the hand. The Launch 1 opens with a push button, which is recessed so that it is level with the flat of the handle. This is a safety feature and makes it harder for the knives to accidentally deploy.

Features
Blade Length: 3.4 inch, Gray DLC
Overall Length: 8 inch
Blade Material: CPM154
Handle Material: Anodized Gray Aluminum
Weight: 3.9 oz.
Includes: Reversible Pocket Clip

***IN STOCK***

1812BLK Made in USA New in box **M390**

The success of Kershaw’s made-in-the-USA Link series has yielded a Dividend. It's a slimmer, sleeker pocket carry—proudly made in the USA in our Tualatin, Oregon factory, yet still built at a very affordable price.

While the original Link is a larger and stouter knife, some of you prefer a slimmer blade. The Dividend is made for you. Not too big, not too small, the Kershaw Dividend is a just-right-sized pocketknife. Its elegant drop-point blade is a perfect 3 inches long and offers enough belly to be an efficient slicer. The knife is easy to open, even one-handed, with SpeedSafe assisted opening and the flipper.

The anodized aluminum handle in Black curves gently to fit the hand comfortably. A decorative molded backspacer and left/right reversible pocketclip make the Dividend both handsome and handy.

Lanyard hole
SpeedSafe® assisted opening
Liner lock
Flipper
4-position pocketclip (left/right, tip-up/down)
Steel: M390 stonewashed finish
Handle: Anodized Black aluminum
Blade length: 3 in. (7.6 cm)
Closed length: 4.25 in. (10.8 cm)
Open length: 7.25 in. (18.5 cm)
Weight: 2.8 oz. (79.4 g)

7100OR Made in USA New in Box.

Made in the USA
Integrated backspacer and lanyard tie-off
Automatic push button open
Push button lock release
Reversible pocketclip, (left/right)
Steel: CPM154, black-oxide BlackWash ™ finish
Handle: Anodized Orange aluminum
Blade length: 3.4 in. (8.6 cm)
Closed length: 4.6 in. (11.7 cm)
Overall length: 8 in. (20.3 cm)
Weight: 4 oz. (114 g)

1776BRZBW Made in USA New in Box

MADE IN THE USA QUALITY, SUPER-AFFORDABLE PRICE

The missing link—between a quality, made-in-the-USA knife and a price most consumers can afford—has been found. Or, to be more precise, Kershaw is making it. Appropriately, we call it the Link and have given it the patriotic model number of 1776.

This Link, model 1776BRZBW, is our drop-point blade model. The 420HC stainless blade steel has higher amounts of carbon and chromium to boost hardenability and corrosion resistance. It is an excellent everyday steel: tough, corrosion resistant, easy to sharpen and takes a good edge. Our BlackWash finish gives the blade the well worn look of your favorite pair of jeans and offers additional blade protection.

The handles are machined from lightweight aluminum and anodized Bronze. The sculpted lines of the handle provide for a comfortable and secure grip. It feels big and solid in the hand and offers a clean look.

For easy opening, the Link is equipped with SpeedSafe assisted opening, accessed with the built-in flipper. The pocketclip is reversible for convenient left or right-handed pocket carry. The Link is made in Kershaw’s state-of-the-art manufacturing facility in Tualatin, Oregon.

ADDITIONAL FEATURES

Made in the USA
SpeedSafe® assisted opening
Flipper
Reversible pocketclip (left/right; tip-up)
Lanyard hole
Steel: 420HC, black-oxide BlackWash™ finish
Handle: Machined 6061-T6 Bronze anodized aluminum
Blade Length: 3.25 in. (8.4 cm)
Closed Length: 4.4 in. (11.2 cm)
Overall Length: 7.6 in. (19.3 cm)
Weight: 4.8 oz. (136.1 g)

7900GRYBLK Made in USA New in Box

With its machined handle and integrated backspacer, the Launch 7, designed by Tim Galyean, has an industrial look that takes it out of the ordinary—way out of the ordinary.

With a long 3.75-inch clip-point blade of CPM 154, the Launch 7 offers a long, lean profile. The steel is the powdered metallurgy version of the popular 154 CM knife steel. This version offers improved toughness, grindability, and polishability as well as providing excellent corrosion resistance and edge retention. The handle is highly sculpted for an attention-grabbing look. Machined contours on both handle top and bottom give the Launch 7 its modern, industrial aesthetic as well as ensuring a solid grip. The backspacer is fully integrated into the handle, adding to the Launch 7’s solid feel and great look. The handle is built of aluminum for lighter weight and is anodized in grey, making it stand out from the rest of the Kershaw automatic line.

The Launch 7 opens with a push of a button and the blade locks into place, ready for use. To release the lock, push the button again and fold the blade back into the handle. The pocketclip is left/right reversible for convenient pocket carry.

Made in the USA
Tim Galyean design
Integrated backspacer
Push button open
Push button lock release
Reversible pocketclip, (left/right)
Steel: CPM154, DLC coating
Handle: Anodized aluminum
Blade length: 3.75 in. (9.5 cm)
Closed length: 5 in. (12.5 cm)
Open length: 8.6 in. (22 cm)
Weight: 3.2 oz. (91 g)

1776BRZSW Made in USA New in Box Plain edge

MADE IN THE USA QUALITY, SUPER-AFFORDABLE PRICE

The missing link—between a quality, made-in-the-USA knife and a price most consumers can afford—has been found. Or, to be more precise, Kershaw is making it. Appropriately, we call it the Link and have given it the patriotic model number of 1776.

This Link, model 1776BRZSW, is our drop-point blade model. The 420HC stainless blade steel has higher amounts of carbon and chromium to boost hardenability and corrosion resistance. It is an excellent everyday steel: tough, corrosion resistant, easy to sharpen and takes a good edge. Our BlackWash finish gives the blade the well worn look of your favorite pair of jeans and offers additional blade protection.

The handles are machined from lightweight aluminum and anodized Bronze. The sculpted lines of the handle provide for a comfortable and secure grip. It feels big and solid in the hand and offers a clean look.

For easy opening, the Link is equipped with SpeedSafe assisted opening, accessed with the built-in flipper. The pocketclip is reversible for convenient left or right-handed pocket carry. The Link is made in Kershaw’s state-of-the-art manufacturing facility in Tualatin, Oregon.

ADDITIONAL FEATURES

Made in the USA
SpeedSafe® assisted opening
Flipper
Reversible pocketclip (left/right; tip-up)
Lanyard hole
Steel: 420HC, Plain Edge Stone Washed finish
Handle: Machined 6061-T6 Bronze anodized aluminum
Blade Length: 3.25 in. (8.4 cm)
Closed Length: 4.4 in. (11.2 cm)
Overall Length: 7.6 in. (19.3 cm)
Weight: 4.8 oz. (136.1 g)

0393SW Made in USA New in Box

S35VN Stonewashed blade, Stonewashed Titanium finish with G10 overlays.

7777 Made in USA New in Box
If you already like the Kershaw Natrix, but would like it even more if it were built in the USA, your wish is granted.

Like the other knives inspired by the original Zero Tolerance 0777, the new Bareknuckle, model 7777, is based on the style of our original award-winning design, but this one offers a slimmed down profile and upgraded materials. The blade is Sandvik 14C28N, a blade steel that was originally created through a Kershaw–Sandvik partnership to produce this high-performance steel. Increased nitrogen in the formula enables 14C28N to provide excellent corrosion resistance and the ability to be hardened to 58–60 Rockwell. Sandvik calls 14C28N the overall highest performing knife steel in the world that still maintains the productivity benefit of being fine-blankable.

The Bareknuckle comes with handsome, anodized-aluminum handles in matte gray. And like our popular Knockout, the Bareknuckle features Kershaw’s patented Sub-Frame Lock to lighten in-pocket weight and to ensure safe blade lock up while in use. The blade opens manually with Kershaw’s KVT ball-bearing system and a flipper. For an additional touch of style, the blade rotates out of the handle on an oversized pivot. We complete the Bareknuckle with a reversible, deep-carry pocketclip for convenient carry on the left or right.
Made in USA
KVT ball-bearing opening
Flipper
Sub-Frame Lock
Reversible deep-carry pocketclip (right/left, tip-up)
Steel: Sandvik 14C28N, stonewashed finish
Handle: 6061-T6 anodized aluminum
Blade Length: 3.5 in. (8.9 cm)
Closed Length: 4.7 in. (11.8 cm)
Overall Length: 8.2 in. (20.7 cm)
Weight: 3.4 oz. (96.4 g)

Kershaw Leek New in Box Made in USA

The Leek series includes some of our most popular knives. And no wonder. Kershaw's Leeks offer Ken Onion's distinctive design as well as the SpeedSafe® ambidextrous assisted opening system. With SpeedSafe, you can smoothly and easily deploy the blade with one hand, either left or right.

Leeks come in a wide variety of handle styles, some with technologically advanced coatings for enhanced performance. From simple bead-blasted stainless steel to "smoked" aluminum to a wide array of colors, you'll find a Leek that's the perfect everyday carrying knife for you. All Leeks include a safety tip-lock and a reversible/removable pocket clip.

Steel: Sandvik 14C28N stainless steel, Handle: 410 stainless steel, Blade length: 3 in. (7.5 cm), Closed length: 4 in. (10.3 cm), Overall length: 7 in. (17.9 cm), Weight: 3.0 oz.

1870OLDAM Made in USA Blems Alabama Damascus

Kershaw blems are offered at a very large discount and have no factory warranty. They are marked with four small x's on blade to designate them as blems. Blems can be many things including but not limited to, scratches, spots on blade coatings, discoloration, Etc. These are sold without boxes and are a great value as users, if you are a collector, I suggest you browse the new items section. I offer 100% satisfaction on your purchases.
Olive handle Knockout with Alabama Damascus blade.

Made in the USA
Flipper, thumbstud
SpeedSafe® assisted opening
Sub-Frame Lock
3-position (tip-up/tip-down right; tip-down left) pocketclip; deep-carry
Steel: Damascus
Handle: 6061-T6 Anodized aluminum
Blade length: 3.25 in. (8.3 cm)
Closed length: 4.6 in. (11.7 cm)
Overall length: 7.9 in. (20 cm)
Weight: 3.4 oz. (96.4 g)

7500BLK Made in USA New in Box

SHORT ON BLADE, TALL ON STYLE

For 2016, we made something special for our neighbors to the south. And since we’re in Oregon, of course we mean California. So for you, California—and for anyone who prefers a shorter-bladed auto—we made the Launch 4. The Launch 4 sports a blade of just 1.9 inches, nice and legal. And pretty handy, too.

The blade is high-performance CPM154 steel. This powdered metallurgy steel has more uniform distribution of carbides—so it takes and holds an excellent edge, provides good corrosion resistance, wear resistance, and toughness. The blade is DLC coated for an additional measure of blade protection and non-reflective good looks. Then to lighten the Launch 4’s weight, we made the handle and integrated backspacer of durable aluminum, anodized in black.

The Launch 4 opens with a push button, recessed so that it is level with the flat of the handle. This is a safety feature and makes it harder for the knives to accidentally deploy. For left-handed use, press the blade-release/lock button with your index finger instead of your thumb. The Launch 4 has a single-position pocketclip and carries tip-up.

Automatic knives are dangerous and should be handled with extreme caution in all circumstances. Comply with all local, State, and Federal regulations regarding the purchase, owning, carrying, and transportation of automatic knives.

Made in the USA
Push button open
Push button lock release
Single-position pocketclip
Steel: CPM154, DLC coating
Handle: Anodized aluminum
Blade length: 1.9 in. (4.8 cm)
Closed length: 3.2 in. (8.1 cm)
Open length: 5.1 in. (13 cm)
Weight: 1.8 oz. (51 g)

7800TEALSW Made in USA New in Box

A TACTICALLY STYLED AUTOMATIC

Get a dark tactical look with the Launch 6 automatic knife from Kershaw.

This slim—and ever-so-slightly wicked-looking—knife features premium CPM154 blade steel. This powdered metallurgy steel offers more uniform distribution of carbides so it takes and holds an excellent edge. It also provides good corrosion resistance, wear resistance, and toughness. Black DLC coating adds non-reflectivity and enhances performance.

Durable anodized aluminum handles lighten the Launch 6's weight and Kershaw machines them to provide a secure grip. This automatic knife opens with a recessed push button. We made the button level with the flat of the handle as a safety feature that makes it harder for the knives to accidentally deploy. Left-handers can use an index finger instead of the thumb to press the blade-release/lock button. The Launch 6 also has a reversible pocketclip and a pre-drilled lanyard tie-off hole.

Automatic knives are dangerous and should be handled with extreme caution in all circumstances. Comply with all local, State, and Federal regulations regarding the purchase, owning, carrying, and transportation of automatic knives.

Automatic knives are dangerous and should be handled with extreme caution in all circumstances. Comply with all local, State, and Federal regulations regarding the purchase, owning, carrying, and transportation of automatic knives.

Made in the USA
Push button open
Push button lock release
Reversible pocketclip (left/right, tip-up)
Integrated backspacer
Steel: CPM154, Stone washed
Handle:Teal Anodized aluminum
Blade length: 3.75 in. (9 cm)
Closed length: 4.9 in (12.4 cm)
Open length: 8.7 in (22 cm)
Weight: 3.8 oz. (107.7 g)

7600RDBLK Made in USA. New in Box

EMERSON DESIGN MEETS KERSHAW AUTO-MAGIC

An exciting new entry in Kershaw's automatic series is the Launch 5. Designed by Emerson and USA-built by Kershaw, this handsome auto takes Emerson’s tactical looks to the next level of refinement.

The Launch 5's CPM154 powdered metallurgy blade steel offers more uniform distribution of carbides—so it takes and holds an excellent edge. It also provides good corrosion resistance, wear resistance, and toughness. The blade is stonewashed for good looks and to hide use-scratches.

To lighten the Launch 5's weight, the handles and integrated backspacer are made of durable anodized aluminum. A machined texture on the handles provides a secure grip. The Launch 5 opens with a push button, recessed so that it is level with the flat of the handle. This is a safety feature and makes it harder for the knives to accidentally deploy. Left-handers can use their index finger instead of their thumb to press the blade-release/lock button. A reversible pocketclip is included and a lanyard tie-off is built into the butt end of the knife.

Automatic knives are dangerous and should be handled with extreme caution in all circumstances. Comply with all local, State, and Federal regulations regarding the purchase, owning, carrying, and transportation of automatic knives.
Automatic knives are dangerous and should be handled with extreme caution in all circumstances. Comply with all local, State, and Federal regulations regarding the purchase, owning, carrying, and transportation of automatic knives.

ADDITIONAL FEATURES

Made in the USA
Designed by Emerson, Built by Kershaw
Automatic push button open
Push button lock release
Reversible pocketclip, (left/right)
Integrated backspacer
Steel: CPM154, Blackwashed
Handle: Anodized RED aluminum
Blade length: 3.4 in. (8.6 cm)
Closed length: 5.1 in. (13 cm)
Open length: 8.5 in. (21.6 cm)
Weight: 4.1 oz. (116.2 g)

**IN STOCK**

1776BLK Made in USAnew in box *** M390 Steel ***

MADE IN THE USA QUALITY, SUPER-AFFORDABLE PRICE

The missing link—between a quality, made-in-the-USA knife and a price most consumers can afford—has been found. Or, to be more precise, Kershaw is making it. Appropriately, we call it the Link and have given it the patriotic model number of 1776.

This Link, model 1776BLK, is our drop-point blade model. M390 blade steel

The handles are machined from lightweight aluminum and anodized Black. The sculpted lines of the handle provide for a comfortable and secure grip. It feels big and solid in the hand and offers a clean look.

For easy opening, the Link is equipped with SpeedSafe assisted opening, accessed with the built-in flipper. The pocketclip is reversible for convenient left or right-handed pocket carry. The Link is made in Kershaw’s state-of-the-art manufacturing facility in Tualatin, Oregon.

ADDITIONAL FEATURES

Made in the USA
SpeedSafe® assisted opening
Flipper
Reversible pocketclip, (left/right; tip-up)
Steel: M390 stonewashed finish
Handle: Machined Black aluminum
Blade length: 3.25 in. (8.4 cm)
Closed length: 4.4 in. (11.2 cm)
Open length: 7.6 in. (19.3 cm)
Weight: 4.8 oz. (136.1 g)

7500EBBLK Made in USA New in Box

SHORT ON BLADE, TALL ON STYLE

For 2016, we made something special for our neighbors to the south. And since we’re in Oregon, of course we mean California. So for you, California—and for anyone who prefers a shorter-bladed auto—we made the Launch 4. The Launch 4 sports a blade of just 1.9 inches, nice and legal. And pretty handy, too.

The blade is high-performance CPM154 steel. This powdered metallurgy steel has more uniform distribution of carbides—so it takes and holds an excellent edge, provides good corrosion resistance, wear resistance, and toughness. The blade is stonewashed finish. Then to lighten the Launch 4’s weight, we made the handle and integrated backspacer of durable aluminum, anodized in Olive.

The Launch 4 opens with a push button, recessed so that it is level with the flat of the handle. This is a safety feature and makes it harder for the knives to accidentally deploy. For left-handed use, press the blade-release/lock button with your index finger instead of your thumb. The Launch 4 has a single-position pocketclip and carries tip-up.

Automatic knives are dangerous and should be handled with extreme caution in all circumstances. Comply with all local, State, and Federal regulations regarding the purchase, owning, carrying, and transportation of automatic knives.

Made in the USA
Push button open
Push button lock release
Single-position pocketclip
Steel: CPM154, Black DLC
Handle: Earth Brown Anodized aluminum
Blade length: 1.9 in. (4.8 cm)
Closed length: 3.2 in. (8.1 cm)
Open length: 5.1 in. (13 cm)
Weight: 1.8 oz. (51 g)

1620DAM Made in USA Blems

Kershaw blems are offered at a very large discount and have no factory warranty. They are marked with four small x's on blade to designate them as blems. Blems can be many things including but not limited to, scratches, spots on blade coatings, discoloration, Etc. These are sold without boxes and are a great value as users, if you are a collector, I suggest you browse the new items section. I offer 100% satisfaction on your purchases.

The Kershaw Scallion is about 20% larger than the Chive and perfect for just about anything! The spring assisted knife features a satin finished steel handles and a Damascus blade (plain). You can activate the spring assist by pushing the thumb-stud a bit (the knife takes over) or by pushing down the "flipper" on the blade (when the knife is closed). Stainless pocket clip & safety.

Specifications:
Overall Length: 5.875"
Blade Length: 2.25"
Closed Length: 3.5"
Weight: 2.3 oz.

** PLEASE NOTE, THE PHOTOS BELOW SHOW A SMALLER BOX AND DO NOT SHOW POUCH, THESE COME WITH POUCH, AND LARGER BOX, THEY WERE NOS FROM ANOTHER DEALER I BOUGHT OUT **

Model # 1725CB 2.2     Made in USA New in Box w/pouch

THE JYD II IS A BIG, BOLD, AND VERY DISTINCTIVE KNIFE

Incredible style. High-performance materials. Super-smooth manual opening. And Kershaw patent-pending Composite Blade technology.

A Composite Blade combines two steels in one blade and enables us to put each steel to work doing what it does best. In this case, we put high-performance Sandvik 14C28N stainless on the spine and most of the blade. With increased nitrogen in the formula, 14C28N provides both good corrosion resistance and high hardness. The cutting edge is high-carbon high-chromium D2 steel. It’s only slightly stain resistant but it provides the razor edge and the easy re-sharpening of high-carbon steel. In time, expect a patina to develop along the edge, which will help protect against corrosion.

Although the JYD II is a big knife, it’s not too heavy and many people like it for every day carrying. The textured G-10 handles provide a non-slip grip, while the handle design keeps your hand in a great cutting position so cutting is always controlled and confident. The JYD II is a manual opening knife with a flipper that lets you open it easily left or right-handed with a pull back on the flipper and a roll of your wrist. A locking liner secures the big-bellied blade in place during use.

Made in the USA
Liner lock
Flipper
Single-position pocketclip
Steel: D2/14C28N composite, bead-blasted finish
Handle: Textured G-10
Blade length: 3.6 in. (9.2 cm)
Closed length: 4.9 in. (12.5 cm)
Overall length: 8.5 in. (21.6 cm)
Weight: 5.8 oz. (164.4 g)