CLEARANCE & BARGAINS

2340 AM-5 Made in China New in Box

Timeless AL MAR™ KNIVES designs meet Kershaw’s precision manufacturing and meticulous fit and finish to bring you updated versions of some of the most iconic AL MAR™ KNIVES.

The AM-5 is the largest of the AM series knives. We updated it with SpeedSafe assisted opening for quick and simple one-handed opening. Just pull back on the flipper. The blade is quality 8Cr13MoV stainless steel with black-oxide coating for an extra measure of blade protection. The front handle scale is G-10—crowned and polished for a smooth feel and classy look. The back is pure steel with a sturdy frame lock to keep the blade in position until you release it. The AM-5 also features a deep-carry pocketclip with AL MAR™ KNIVES’ red logo emblem.

In addition to a dedication to the original designs, Kershaw kept two things in mind when creating these exciting AL MAR™ KNIVES: quality and value. We are using top-notch materials including top-of-the-line blade steel and real G-10 scales. Plus, we’re paying special attention to details. Yet we’re keeping the prices down on these classic knives—which means these brilliant AL MAR™ KNIVES are now readily available to a new generation of knife enthusiasts.
AL MAR™ KNIVES design
SpeedSafe® assisted opening
Frame lock
Flipper
Single-position deep-carry pocketclip (right, tip-up)
Steel: 8Cr13MoV, black-oxide coating
Handle: Polished contoured G-10 front, contoured steel back with black-oxide coating
Blade length: 3.5 in. (8.9 cm)
Closed length: 4.25 in. (10.8 cm)
Open length: 7.75 in. (19.7 cm)
Weight: 3.8 oz. (107.7 g)

ZT0804 Made in USA New in Box

ZT and Todd Rexford have teamed up to create the 0804CF, based on Todd’s custom knife, the Gamma.

The nearly four-inch blade is made of fine-grained CTS-204P, a tough, wear and corrosion resistant steel ready for hard-duty. This powdered metallurgy steel features vanadium-rich carbides for top wear resistance while high chromium helps it resist corrosion. This high-performance blade is tungsten DLC coated. DLC gives the blade an attractive, matte finish as well as enhancing performance by reducing friction and improving hardness. The 0804CF’s handle has a carbon-fiber front and a DLC-coated titanium back. These premium materials make the 0804 both tough and lightweight. A titanium frame lock with hardened steel lockbar insert firmly secures the blade during use. The ambidextrous 0804 can be easily opened using the flipper and KVT ball-bearing system.

The 0804CF proudly declares its made-in-the-USA status with a handsome shield-shaped badge on the pivot head. ZT also added a custom aluminum backspacer and machined titanium pocketclip.

The 0804CF, from ZT and Todd Rexford, is a perfect fit when looking for a larger knife built for high performance.

Made in the USA
KVT ball-bearing opening system
Flipper
Reversible clip (left/right, tip-up)
Titanium frame lock, hardened steel lockbar insert
Custom machined titanium clip, DLC coating
Custom aluminum backspacer
Steel: CTS-204P, tungsten DLC coating
Handle: Carbon fiber front, titanium back
Blade length: 3.9 in. (9.9 cm)
Closed length: 4.9 in. (12.4 cm)
Overall length: 8.9 in. (22.6 cm)
Weight: 5.1 oz. (144.6 g)

Fixed blade antelope hunter with leather sheath, new in box, made in china, Orange handle.

$15 shipped

3850 Swerve Made in China New no Box

SWERVE, BUT DON’T MISS IT

You’re going to like this one. It’s designed to be a right-sized, tough, every day carrying and work knife.

The extra-wide, drop-point blade offers excellent slicing and will handle just about any other kind of cutting task as well. 8Cr13MoV stainless steel makes the blade sturdy and offers good edge-holding capabilities. Unusual jimping on the blade back adds style without being so aggressive that your thumb complains. A stonewashed finish hides scratches.

For a good grip, the Swerve has a contoured handle that “swerves” slightly to fit comfortably in the hand. Kershaw’s exclusive K-Texture™ on the handle enhances grip. The Swerve opens one-handed with SpeedSafe with either flipper or thumbstud. For convenient carrying, it also has a reversible, deep-carry clip.

ADDITIONAL FEATURES

SpeedSafe assisted opening
Liner lock
Flipper and thumbstud
Reversible pocketclip (left/right); deep-carry
Steel: 8Cr13MoV, stonewashed finish
Handle: Glass-filled nylon, K-Texture™ grip
Blade length: 3 in. (7.6 cm)
Closed length: 4.25 in. (10.8 cm)
Overall length: 7.25 in. (18.4 cm)
Weight: 4.8 oz. (136.1 g)

ZT0909 Made in USA New in Box

Zero Tolerance and Les George have teamed up once again to create the new 0909. Les went back to his roots in designing the 0909, basing it on his popular Talos, which, in turn, was a production version of Les’ first custom knife, the FM-1.

Curves define the 0909. The rounded index finger contour, the machined scoops at mid-handle, and the deep arc leading to the blade tip all combine to give the 0909 its distinctive look. This heavy-duty powerhouse features premium materials like S35VN blade steel, G-10 handle scales, and extra-thick liners. The blade is nearly four-inches of S35VN stainless steel that’s strong, wear resistant, corrosion resistant, and tough. This high-end steel ensures the user of a sharp, reliable edge that will last a long time.

The handle is built of machined G-10, contoured for sure grip and to reinforce Les’ curved design concept. Strong, lightweight, and resistant to temperature changes, this glass-fiber material makes an ideal knife handle. To back the G-10 scales, ZT added extra-thick liners—like the ones found in our classic 0350 series. The beefy liners make the 0909 extremely stable and rigid, as well as providing a secure liner lock that holds the blade safely open during use. Finally, a reversible, deep-carry pocketclip allows the knife to ride comfortably low in the pocket for convenient everyday carry.

Made in the USA
KVT ball-bearing opening system
Flipper
Reversible deep-carry clip (left/right, tip-up)
Secure liner lock
Extra thick liners
Steel: S35VN, stonewashed finish
Handle: Textured G-10
Blade length: 3.8 in. (9.7 cm)
Closed length: 4.75 in. (12.1 cm)
Overall length: 8.5 in. (21.6 cm)
Weight: 7.5 oz. (212.6 g)

1620C Made in USA New in Box

THE RIGHT-SIZED SCALLION FOR YOUR NEXT HUNTING TRIP

The Scallion is one of our most popular knives. With its handy 2 1/4-inch blade, the Scallion is the perfect size for lightweight and convenient pocket carry. And with its camo pattern handle, it’s also the perfect size and the perfect knife for your next hunting trip—or every day carry.

The Scallion’s recurve blade makes it handy for most campsite and field chores. It features a high-carbon stainless steel blade with good edge retention and excellent corrosion resistance. The bead-blasted finish gives the blade a matte look and it’s easy to maintain, too. Like all Scallions, the camo Scallion is equipped with SpeedSafe assisted opening. With SpeedSafe, you can open the blade one-handed—which can be extra convenient when you’re in the great outdoors. Just pull back on flipper and the blade moves out of the handle, ready for use.

The camo Scallion’s handle is anodized aluminum over steel liners. Anodizing not only enables the aluminum to accept the camo pattern but it actually strengthens the aluminum. For safety, the camo Scallion has a locking liner to keep it locked safely open and a Tip-Lock to keep it locked safely closed during transport.

PLEASE NOTE: Blade styles and hardware may vary on some of these products.

Made in the USA
SpeedSafe® assisted opening
Liner lock
Single-position pocketclip
Steel: 420HC, bead-blasted finish
Handle: 6061-T6 anodized aluminum
Blade length: 2.4 in. (6.1 cm)
Closed length: 3.5 in. (8.9 cm)
Overall length: 5.75 in. (14.6 cm)
Weight: 2.5 oz. (70.9 g)

1776ST Made in USA New in Box

MADE IN THE USA QUALITY, NOW WITH PARTIAL SERRATION

The popular made-in-the-USA Link now has a new all-American brother—with an extra edge. The Link 1776ST offers a partially serrated blade for additional cutting versatility.

The 420HC stainless blade steel has higher amounts of carbon and chromium to boost hardenability and corrosion resistance. It is an excellent everyday steel: tough, corrosion resistant, easy to sharpen and takes a good edge. A stonewashed finish gives the blade surface a desirable roughened or scuffed look, and helps hide scratches and fingerprints.

The handles are matte-finished glass-filled nylon for lightweight strength. The sculpted lines and texture of the handle provide for a comfortable and secure grip. The Link feels big and solid in the hand and offers a clean look.

For easy opening, the Link is equipped with SpeedSafe assisted opening, accessed with the built-in flipper. The pocketclip is reversible for convenient left or right-handed pocket carry. The Link is made in Kershaw’s state-of-the-art manufacturing facility in Tualatin, Oregon.

ADDITIONAL FEATURES

Made in the USA
Reversible pocketclip, (left/right)
SpeedSafe® assisted opening, built-in Flipper
Steel: 420HC, stonewashed finish
Handle: Glass-filled nylon
Blade length: 3.25 in. (8.4 cm)
Closed length: 4.4 in. (11.2 cm)
Overall length: 7.6 in. (19.3 cm)
Weight: 4 oz. (113.4 g)

2150CFX Made in China New in Package

Very Nice little pocket knife with locking blade and lifetime warranty.

Blade– 2 inches
closed- 2-5/8 inches
weight–1.4 oz.
Handle– steel with carbon fiber insert

3560 Made in China New in Box
Kershaw and Rick Hinderer have teamed up to bring you a smaller pocketknife with plenty of style, the Kershaw Ember.

The first thing you’ll notice, of course, is the Ember’s size. The blade is just two inches long and, when closed, the knife is a compact 2.8 inches. But the next thing you’ll notice is the Ember’s striking looks. Angles, contours, matte-grey coating, and black hardware give it a tactical look-and-feel that we think knife users will really warm up to.

For easy opening, the Ember features SpeedSafe® assisted opening and a handy, built-in flipper. The modified clip-point blade has an ergonomic top curve, which gives the user a convenient place to position an index finger when guiding the knife’s edge in a close-cutting situation. A sturdy frame lock secures the blade in position for safe use.

The blade is heat treated to Kershaw’s demanding specifications to bring out the very best qualities in the steel. Titanium carbo-nitride coating on both blade and handle give the Ember a matte grey finish. Black hardware, including the three-position pocketclip, enhances this little knife’s look.

Easy to carry in pocket, briefcase, or backpack, the new Ember from Kershaw and Rick Hinderer packs a lot of style into a small package.
Flipper
SpeedSafe® assisted opening
Frame lock
3-position deep-carry pocketclip
Steel: 8Cr13MoV, titanium carbo-nitride coating
Handle: 410, titanium carbo-nitride coating
Blade length: 2 in. (5.1 cm)
Closed length: 2.8 in. (7.1 cm)
Overall length: 4.75 in. (12.1 cm)
Weight: 2.2 oz. (62.4 g)

2155CFX Made in China New in Package

Very Nice little pocket knife with locking blade and lifetime warranty.

Blade– 2 5/8 inches
closed- 3-1/2 inches
weight–2.7 oz.
Handle– steel with carbon fiber insert

1835TBLK Kuro Made in China New no Box

YOUR NEXT MUST-HAVE KNIFE

All eyes turn to you when you take the Kershaw Kuro out of your pocket and put it to work. The Kuro offers standout looks—and standout function. The blade is a modified—or Americanized—tanto and a drop point. It has two primary blade grinds: at the tip and along the edge. This gives the Kuro a strong piercing tip with plenty of steel behind the tip to provide strength. The belly-less edge provides good slashing capability.

For speedy, one-handed opening, the Kuro has SpeedSafe assisted opening, accessed with the built-in flipper. Just pull back on the flipper blade protrusion to start the blade out of the handle. Then the SpeedSafe torsion bar takes over and the knife opens easily, ready for use. The ambidextrous flipper works perfectly for both lefties and righties.

The handle scales are glass-filled nylon for durability and dimensional stability, even in temperature extremes. The eye-catching pattern on the scales offers additional grip traction and looks like nothing else. A sturdy locking liner secures the blade open until you release it.

ADDITIONAL FEATURES

SpeedSafe® assisted opening
Liner lock
Flipper
Reversible (tip-up/tip-down) pocketclip
Steel: 8Cr13MoV, black-oxide coating
Handle: Glass-filled nylon
Blade length: 3.1 in. (7.9 cm)
Closed length: 4.1 in. (10.5 cm)
Overall length: 7.25 in. (18.4 cm)
Weight: 3.2 oz (90.7 g)

3100X Made in China New in Package

Very Nice little pocket knife with locking blade and lifetime warranty.

Blade– 1 7/8 inches
closed- 2-5/8 inches
weight–1.2 oz.
Handle– steel with grip insert

1830 OSO Sweet Made in China New in Box

ONE SWEET KNIFE? OH YES, IT IS.

This is indeed one sweet little pocketknife. The Oso Sweet features a classic drop-point blade that gives you maximum workaday utility, at the same time, this knife has plenty of style and features that will get it—and you—noticed. First of all, the Oso Sweet opens one-handed with SpeedSafe assisted opening.

Just pull back on the ambidextrous flipper and the blade moves out of the handle ready for use. Whether you’re a left-hander or right-hander, your blade is easy to access and ready to go when you are. Kershaw heat-treats the 8Cr13MoV blade steel to bring out its high-performance characteristics like good edge retention, strength, hardness, and wear resistance.

The handle is glass-filled nylon for excellent durability and incorporates a textured “scale” pattern that gives the Oso Sweet a unique look. A locking liner secures the blade during use and recloses easily for pocket carry or storage. The pocketclip can be reversed for tip-up or tip-down carry. The Oso Sweet is one of our most popular knives. Once you get your hands on one and start using it, we think it will be pretty popular with you, too.

ADDITIONAL FEATURES

SpeedSafe® assisted opening
Liner lock
Reversible (tip-up/tip-down) pocketclip
Steel: 8Cr13MoV, satin finish
Handle: Glass-filled nylon
Blade length: 3.1 in. (7.9 cm)
Closed length: 4.1 in. (10.5 cm)
Overall length: 7.25 in. (18.4 cm)
Weight: 3.2 oz. (90.7 g)

3650ST Volt II Made in China New in Box

OUR SECOND GENERATION VOLT, THE VOLT II

Designed by RJ Martin, the Volt II has the same versatile blade and handle style as the original Volt, but with a hardworking 8Cr13MoV stainless steel blade and textured, black glass-filled nylon scales. With this iteration, the original Volt showpiece becomes a tough, working knife. And to make sure your blade is always ready to go to work when you need it, the Volt II opens one-handed thanks to Kershaw’s SpeedSafe® assisted opening system.

A simple pull back on the flipper and the Volt II opens smoothly and easily. We think you’ll appreciate the versatility of the Volt II’s slightly dropped point blade. This classic shape is just about perfect for any general utility task. Partial blade serration just extends the Volt II’s capabilities and makes it easy to whip through materials like cord, webbing, or rope.

For a secure grip and a solid, satisfying feel in the hand, the Volt II has finger contours on the handle, diamond-patterned, glass-filled nylon handles, and heavy jimping on the back of the blade. The Volt II’s pocketclip is reversible for tip-up or tip-down carry. And did we mention that you get all this at a value price?

ADDITIONAL FEATURES

SpeedSafe® assisted opening
Liner lock
Flipper
Reversible (tip-up/tip-down, right) pocketclip
Steel: 8Cr13MoV, bead-blasted finish
Handle: Glass-filled nylon
Blade length: 3.25 in. (8.3 cm)
Closed length: 3.9 in. (9.8 cm)
Overall length: 7.1 in. (18 cm)
Weight: 3.3 oz. (93.6 g)

This is a mint Right Handed 1510st Random Task , first assisted opening knife made by kershaw and designed by Ken Onion. It is mint condition, never carried or used. New in original box with papers.

1905 Induction Made in China New in Box

In Physics, “induction” is the production of a magnetic state due to the proximity of a magnetized body. In a way, that definition applies to the Kershaw Induction, too. We think it’s got a magnetic look and—given a little proximity—you just might find yourself irresistibly attracted.

Why? Let’s start with the blade. It’s a drop-point, but definitely not old school. While the flats are satin finished, the grinds—both along the cutting edge and the deep top swedge—are black-oxide coated. On the practical side, the coating helps protect the steel. On the less practical side, it looks outstanding.

Also outstanding is the Induction’s Hawk Lock. Once the blade is open, the Hawk Lock automatically locks it into position. When you’re ready to close the blade, pull the Hawk Lock slider back toward the knife butt and fold the blade in. Simplicity itself. The Induction’s handle is lightweight-yet-strong anodized aluminum with a textured glass-filled nylon front insert for sure grip.

The pocketclip is reversible for left/right tip-up carry and there’s a pre-drilled lanyard hole for additional versatility.

Manual opening
Hawk lock
Reversible pocketclip (left/right, tip-up)
Steel: 8Cr13MoV, black-oxide & satin finish
Handle: Anodized aluminum with glass-filled nylon texture inserts
Blade length: 3.1 in. (7.9 cm)
Closed length: 4.4 in. (11.2 cm)
Open length: 7.6 in. (19.3 cm)
Weight: 3.75 oz. (106.3 g)

2335 Made in China New in Box

Timeless AL MAR™ KNIVES designs meet Kershaw’s precision manufacturing and meticulous fit and finish to bring you updated versions of some of the most iconic AL MAR™ KNIVES.

The AM-3 features SpeedSafe assisted opening for quick and simple one-handed opening. Just pull back on the flipper or push on the thumbstud. The blade is quality 8Cr13MoV stainless steel with a handsome satin finish and a top swedge. The front handle scale is G-10—crowned and polished for a smooth feel and classy look. The back is pure steel with a sturdy frame lock to keep the blade in position until you release it. The AM-3 also features a deep-carry pocketclip with AL MAR™ KNIVES’ red logo emblem and—for an extra measure of visual interest—we used red standoffs.

In addition to a dedication to the original designs, Kershaw kept two things in mind when creating these exciting AL MAR™ KNIVES: quality and value. We are using top-notch materials including top-of-the-line blade steel and real G-10 scales. Plus, we’re paying special attention to details. Yet we’re keeping the prices down on these classic knives—which means these brilliant AL MAR™ KNIVES are now readily available to a new generation of knife enthusiasts.

Red tube spacers
AL MAR™ KNIVES design
SpeedSafe® assisted opening
Frame lock
Flipper
Single-position deep-carry pocketclip (right, tip-up)
Steel: 8Cr13MoV, satin finish
Handle: Polished contoured G-10 front, contoured steel back with black-oxide coating
Blade length: 3 in. (8.6 cm)
Closed length: 3.75 in. (9.2 cm)
Open length: 7.2 in. (18.2 cm)
Weight: 2.3 oz. (65.2 g)

1840ST Made in USA New in Box *Discontinued*

THE SHALLOT IS THE LARGEST OF KERSHAW’S “ONION” SERIES

Crave a larger pocketknife? Then the Shallot is for you. With its slightly recurved blade and ergonomically contoured handle, the Shallot offers dramatic lines and dynamic performance in a larger-sized pocketknife.

The 3 1/2-inch blade is Sandvik 14C28N, a high-performance stainless steel designed in a partnership between Sandvik Steel and Kershaw. Additional nitrogen in the formula gives the steel both excellent corrosion resistance and the ability to be hardened to 58-60 Rockwell—so it can take a wicked edge. The slight recurve in the blade makes it perfect for multi-tasking, from slicing to piercing. For even more cutting versatility, this Shallot is comes with partial serration.

For easy, one-handed opening, the Shallot is equipped with SpeedSafe assisted opening. And since it opens with an ambidextrous flipper on the top of the knife, it’s perfect for both left- and right-handed users. Just pull back on the flipper—actually a protrusion on the back of the blade—to start the blade out of the handle. Once started, SpeedSafe takes over and the blade clicks smoothly into place, ready for use. The Shallot offers a sturdy frame lock, a reversible pocketclip, and provides great looks and top performance.

Made in the USA
SpeedSafe® assisted opening
Frame lock
Reversible (tip-up/tip-down) pocketclip
Steel: 14C28N, bead-blasted finish
Handle: 410 stainless steel, bead-blasted finish
Blade length: 3.5 in. (8.9 cm)
Closed length: 4.4 in. (11.1 cm)
Overall length: 7.9 in. (20 cm)
Weight: 4.2 oz. (119 g)